How to Set Up the Gajetto Wireless CarPlay Adapter: Step-by-Step Guide
Share
How to Use the Gajetto Wireless CarPlay Adapter: A Complete Guide
If you’re tired of plugging in your phone every time you get into your car, the Gajetto Wireless CarPlay Adapter is exactly what you need.
This small but powerful device transforms your factory-wired CarPlay or Android Auto system into a fully wireless experience — no more cables!
In this guide, we’ll show you how to set it up, common troubleshooting tips, and everything you need to know.
⸻
What is the Gajetto Wireless CarPlay Adapter?
The Gajetto Wireless CarPlay Adapter is designed for vehicles that already support wired CarPlay or wired Android Auto.
It allows you to connect your smartphone via WiFi and Bluetooth, eliminating the need for USB cables.
Key Features:
• Supports both iOS and Android devices.
• Dual-band WiFi (2.4GHz and 5GHz) for fast, stable connections.
• Compact and durable design.
• Easy plug-and-play setup.
Note: Your car must already support wired CarPlay or wired Android Auto for this adapter to work.
⸻
What’s Inside the Box?
• 1 × Gajetto Wireless CarPlay Adapter
• 1 × USB Cable
• 1 × User Manual
⸻
Gajetto Adapter Specifications
Specification Details
Supported Phones iOS 10+ (iPhone), Android 11+
WiFi 2.4GHz & 5GHz
Input Voltage 5V ± 0.2A
Material ABS Plastic
Size 78 × 46 × 13mm
⸻
How to Set Up the Gajetto Wireless Adapter
Setting up the Gajetto adapter is simple and fast. Just follow these steps:
Setup Instructions:
1. Plug the Gajetto Wireless CarPlay Adapter into your car’s USB port.
2. Wait 10–20 seconds for the device to boot up.
3. On your phone, search for the WiFi network named Gajetto-xxx.
4. Connect to the WiFi using the password 12345678.
5. Pair your phone’s Bluetooth with the adapter.
6. Enjoy wireless CarPlay or wireless Android Auto seamlessly!
⸻
How to Confirm Your Car is Compatible
Before setting up, make sure:
• Your car has factory-installed wired CarPlay or Android Auto.
• Wireless CarPlay/Android Auto isn’t already built into your car (if it is, you don’t need this adapter).
Without factory wired support, the Gajetto Adapter won’t work.
⸻
How to Set Up Wireless Android Auto (Special Tip for Android Users)
If your Android phone doesn’t connect wirelessly by default, follow these steps:
1. Open the Android Auto app on your smartphone.
2. Tap the “Version” section 10 times to activate Developer Mode.
3. Go to Developer Settings.
4. Turn ON “Add Wireless Projection to Settings”.
5. Reconnect WiFi and Bluetooth.
6. Your phone should now support wireless Android Auto!
Some Android models may require manual activation of wireless projection.
⸻
Troubleshooting and FAQs
Even though setup is simple, here are some tips if you run into issues:
1. Phone Can’t Find WiFi?
• Unplug and replug the adapter.
• Wait 10–20 seconds after reconnecting.
• Check that your phone’s WiFi is enabled.
2. Phone Can’t Find Bluetooth?
• Restart Bluetooth on your phone.
• Unplug and reconnect the adapter.
3. CarPlay or Android Auto Disconnects Frequently?
• Ensure a strong WiFi/Bluetooth signal.
• Keep your phone close to the adapter while driving.
• Avoid obstacles blocking the signal.
4. Black Screen Issue?
• Simply unplug and replug the adapter to reset the connection.
5. Connection Stops After Long Use?
• Unplug and plug in the adapter again to refresh the connection.
⸻
Understanding the LED Light Status
LED Status Meaning
Red Light Power On
Green Light Successfully Connected
⸻
Final Tips for Best Performance
• Always keep your car software updated.
• Make sure your phone’s operating system is up-to-date.
• Reset the adapter if you change WiFi settings or face repeated issues.
• Remember: This adapter is only for cars with wired CarPlay/Android Auto support.
⸻
Conclusion
The Gajetto Wireless CarPlay Adapter brings unmatched convenience to your daily drive.
Setup is easy, the connection is stable, and the freedom of wireless usage makes every trip better.
Ditch the cables — upgrade your driving experience today with Gajetto!